FM-S001 Series 4 Entries Vertical/Dome Fiber Optic Splice Closure Max. Capability up to 12 Fibers
Vertical (Dome) fiber optic splice closures are made of excellent engineering plastics.Fiber-Mart.COM supply different ports types, fittings and different fiber optic core numbers for vertical/dome fiber optic splice closures. The main application for vertical fiber optic splice closure is in CATV, telecommunications and fiber optic networks. They are suitable for protecting optical fiber splices in straight through and branching applications, and can be used in aerial, duct and direct buried fiber optic cable projects.
Key Features
-
High-strength engineering plastic shell
-
High mechanical performance
-
Great aging resistant ability
-
Excellent sealing performance
-
Endure harsh conditions such as vibration, impact, tensile cable distortion and strong temperature changes
-
Does not require special tools, easy to install and open the duplicate.
-
The use of reusable components to open seal in order to ensure a good airtight waterproof performance.
-
Come with related fiber optic trays and splice protection sleeves
-
The scope of application : aerial, direct-buried, wall-mounting, duct-mounting
Main Technical Parameters
-
The application of temperature : -40℃~65℃
-
Atmospheric pressure: 70~106KPa
-
Resist pull: >1000N
-
Insulation resistance: >2×104MΩ
-
Resist pressure: >2000N/10cm2pressure,time 1 min
-
Dielectric strength: 15KV (DC)/1 min spark-over and no flying arc.
Specifications
-
No. of Cable Inlet/Outlet: 4(one oval port and three round ports)
-
Number of Fibers, Bunchy: 12
-
Sealing of Shells: Silicon rubber
-
Sealing of Inlet/Outlet ports: Heat-shrinkable tube
-
Length:435 mm, Diameter:190 mm
-
Weight: 2.6kg
Sample Picture
Basic structure and configuration
Dimension and capacity;
Outside dimension (LxD) |
435mm×190mm |
Weight (excluding outside box) |
2350g-2600g |
Number of inlet/outlet ports |
one oval and three round |
Diameter of fiber cable |
Φ8mm - Φ25 mm |
Capacity of FOSC |
Bunchy: 12—96(fibers) |
Ribbon: 288(fibers) |
Main components
No. |
Name of components |
Quantity |
Usage |
Remarks |
1 |
FOSC cover |
1 piece |
Protecting fiber cable splices in whole |
Internal diameter: |
|
|
|
|
355 ×150(mm) |
2 |
Fiber optic splice tray (FOST) |
Max. 6 trays (bunchy) Max. 4 trays (ribbon) |
Fixing heat shrinkable protective sleeve and holding fibers |
Suitable for: Bunchy:12,24(cores) Ribbon:6 (pieces) |
3 |
Fiber holding tray |
1 pcs |
Holding fibers with protective coat |
|
4 |
Foundation |
1 set |
Fixing fiber cable, reinforced core and FOST |
|
5 |
Base |
1 set |
Fixing internal and external structure |
|
6 |
Seal fitting |
1pieces |
Sealing between FOSC cover and base |
|
7 |
Pressure testing valve |
1 set |
After injecting air, it is used for pressure testing and sealing testing |
Configuration as per requirement |
8 |
Earthing deriving device |
1 set |
Deriving metallic parts of fiber cable in FOSC for earthing connection |
Configuration as per requirement |
Main accessories and special tools
No. |
Name of accessories |
Quantity |
Usage |
Remarks |
1 |
Heat shrinkable protective sleeve |
|
Protecting fiber splices |
Configuration as per capacity |
2 |
Nylon tie |
|
Fixing fiber with protective coat |
Configuration as per capacity |
3 |
Heat shrinkable fixing sleeve (single) |
|
Fixing and sealing single fiber cable |
Configuration as per requirement |
4 |
Seal tape |
|
Fixing and sealing mass of fiber cable |
Configuration as per specification |
5 |
Branching clip |
|
Branching fiber cables |
Configuration as per requirement |
6 |
Earthing wire |
1 piece |
Putting through between earthing devices |
|
7 |
Desiccant |
1 bag |
Put into FOSC before sealing for desiccating air |
|
8 |
Labeling paper |
1 piece |
Labeling fiber |
|
9 |
Special wrench |
1 pieces |
Tightening nut of reinforced core |
|
10 |
Metal hoop |
1 set |
For wall mounting and pole hugging |
|
11 |
Buffer tube |
To be decided by customers |
Hitched to fibers and fixed with FOST, managing buffer |
Configuration as per requirement |
12 |
Aluminum-foil paper |
1 piece |
Protect the bottom of FOS |
|