MPO to LC Fiber Breakout Cable, 8 Fibers MPO to 4 Duplex LC, OM4 Fiber - MPO Breakout Cable
MPO LC breakout Cable is the high dense degree of optical fiber pre-connect system,which is generally use in three areas:
Fiber-Mart's MPO to 4 Duplex LC fiber patch cable is compliant to IEC-61754-7 and TIA-604-5(FOCIS-5) standard. It can be widely used for
-
The data centra application with high dense degree environment
-
The optical fiber to the building
-
The internal connector application in fiber equipment such as Splitter, 40G /100G SFP and SFP+.
10G upgrade to 40G/100G data center.
MPO Connector
 |
 |
|
MPO Male with Pins |
MPO Female without Pins |
|
Two other clearly visible features are the noses and guide grooves (keys) on the top side. The Female and Male need to be used together. |
Pre-terminated MTP Technology-Polarity Type B (Cross)
The application above is for the MTP-LC harness cable connecting a QSFP+ port to (4)SFP+ ports directly.
In many existing DC environments, LC-MTP cables are used to support high density fiber trunks between switches, rack patch panels and main distribution cabling panels (MDA).
For example:
The above is the Eight-Fiber MTP-LC Assembly uses a pinless connector on one end for interfacing with the QSFP port on the Cisco Nexus 6000series, The other end contains four LC uniboot connectors, which provide connectivity to the SFP+ ports on the switch. The polarity of the assembly pairs the fibers from the MTP Connector from the outside to the inside; thus, fiber 1 and fiber 12 are a duplex pair, as are fiber 2 and fiber 11, etc.
MPO 8 Fiber Distribution
Notes:
Please kindly to choice the best one for your project from above the two kinds of 8 fiber MPO harness cable array methods.
In the 40/100GbE project, 8 optical fibers are required.
MPO to LC Breakout Assembly Structure Illustration
12-Fiber Mini-Core Cable structure
MPO Hybrid Harnesses Fiber Patch Cables are terminated with MPO connector on one end and other end with LC, FC, SC, ST, or MTRJ connectors to meet a variety of fiber cabling requirements.
1.The default diameter of the MPO cable is 3.0mm.
2.The diameter of branch cable could be choose as 0.9mm,2.0mm,please kindly contact us at [email protected] for other diameter standard.
3.Fiber-Mart can also custom the pulling eyes, welcome to contact us if you need.
MTP/MPO Production Machine & Testing Equipment
|
1 |
Our adopt industry's leading high-performance polishing machine, and complemented by precision plates holders designed for MT ferrules. |
|
|
|
2 |
The industry leading device of 3D interferometer provides verification of MTP/MPO polishing process, the interferometer making all parameters of hte polished MT ferrule complies and exceeds industry standards. |
|
|
|
3 |
After the 3D interference detection, the flexibility of the tester provides the the complete spectrum of optical testing required for complex and high fiber count cable assemblies. |
MPO Termination
|
Type |
Single mode |
Single mode |
Multi mode |
|
(APC polish) |
(PC polish) |
(PC polish) |
|
Fiber count |
8, 12, 24 etc. |
8, 12, 24 etc. |
8, 12, 24 etc. |
|
Fiber type |
G652D, G657A1 etc. |
G652D, G657A1 etc. |
OM1, OM2, OM3 etc. |
|
Maximum Insertion Loss |
Elite |
Standard |
Elite |
Standard |
Elite |
Standard |
|
Low Loss |
Low Loss |
Low Loss |
|
≤0.35 dB |
≤0.70 dB |
≤0.35 dB |
≤0.70 dB |
≤0.35dB |
≤0.60dB |
|
Return Loss |
≥60 dB |
≥60 dB |
N/A |
|
Durability |
≥500 times |
≥500 times |
≥500 times |
|
Operating Temperature |
-40℃ ~ +80℃ |
-40℃~ +80℃ |
-40℃~ +80℃ |
|
Test Wavelength |
1310nm |
1310nm |
850nm |
Common Termination Breakout Ports
|
Type |
Single mode |
Multi mode |
|
(UPC APC polish) |
(UPC polish) |
|
Insertion Loss |
≤0.30dB |
≤0.30dB |
|
Return Loss |
≥55 dB |
≥60 dB |
≥25 dB |
|
Durability |
≥1000 times |
≥1000 times |
|
Operating Temperature |
-40℃ ~ +80℃ |
-40℃ ~ +80℃ |
|
Test Wavelength |
1310nm |
850nm |
Note: Maximum Bandwidths of Different Multimode Fibers
OM1 – 62.5 um Core – 10GBit up to 33 meters, gigabit up to 300m
OM2 – 50 um Core – 10GBit up to 82 meters,gigabit up to 500m
OM3 – 50 um Core, Laser Optimized – 10GBit up to 300 meters,gigabit up to 1000m
OM4 – 50 um Core, Laser Optimized – 10GBit up to 550 meters,gigabit up to 1000m
Make To Order, Ordering Part Number
|
Fiber Type |
Fiber Standard |
Fiber Count |
Cable Type |
Termination |
Cable Length(m) |
Breakout Length 1&2(Inches) |
Breakout Termination |
Polish Type |
OM4
OM3
OS1/2
OM2
OM1 |
12 Fibers |
8~144 Fibers |
LSZH Bunch
LSZH Ribbon
Riser Bunch
Riser Ribbon |
First Connector:
MPO Female
MPO Male |
1~999 |
12~99
(36" is typical) |
3.0mm |
UPC
APC |
|
24 Fibers |
24~144 Fibers |
Second Connector:
LC Duplex/LC Simplex
SC Duplex/SC Simplex
ST Duplex/ST Simplex
FC Duplex/FC Simplex |
0.9μm (standard)
2.0mm
3.0mm |
Note:Polishing connector (A): PC (multimode), APC 8° (single-mode)
Polishing connector (B) : PC (multimode/single-mode), APC 8° (single-mode)
Furcation length (B): 0.5m/0.3m for 1m total length
Type of protection connector: IP20
Patch cord Type: Minicore cable, round
.webp)
