Saturday 04 November, 2017 | RSS Feed

40CH DWDM MUX Insertion Loss Analysis and Testing

by www.fiber-mart.com

DWDM, which can add great capacity of bandwidth for long haul backbone data center by multiplexing different wavelengths into one fiber, is one of the dominant technology used in various applications. And in DWDM systems, 40CH DWDM Mux is a high density, low loss and standalone passive optical module that provides excellent solutions for various architectures. When purchasing a DWDM Mux, one of the vital parameters that need to be considered is the insertion loss. Higher insertion loss means more investment in DWDM network deployment. This post focuses on analyzing the insertion loss of 40CH DWDM Mux and its testing method to offer some help for your Muxs purchase.
Understand Insertion Loss
As its name shows, insertion loss is the total optical power loss (often measured by dB) caused by the insertion of an optical component. Any component in a fiber optic interconnection will introduce loss definitely. For example, insertion loss of a connector or splice is the difference in power that we can see when inserting the component into the system. The insertion loss is affected by the fiber core meter on the transmit and receive end, as well as the receive conditions in two joint fibers.
12 channels, Type A, Pigtailed Module, Simplex BIDI, Athermal AWG, DWDM Mux & Demux
In a completed network, the total loss comes not only from the optical connectors, but also from optical cables and the diverse ports of optical components inserted. As we all know, there are several types port on 40CH DWDM Mux: line port, channel port and monitor port, some Muxs may have other function ports like 1310nm port, 1510nm port and expansion port. No matter which type of ports is connected to a DWDM system, some insertion loss occurs. Therefore, in order to ensure good performance of a whole DWDM optical link, a high quality DWDM Mux should have a reasonable insertion loss value.
40ch dwdm mux demux
Insertion Loss Comparison in Different Vendors
If you are familiar with DWDM Muxs, you may know how great impact the insertion loss of them has on the whole network links. The higher the DWDM channel insertion loss is, the more cost may be needed, for optical amplifiers are required to keep a balance signal power in the link. And there are many vendors and suppliers of 40CH DWDM Mux in the market. Here is a graph showing the maximum insertion loss value of 40CH DWDM Mux of different vendors.
mux demux insertion loss
In a DWDM networks, the budget loss mainly comes from optical fiber path loss, DWDM OADM and Mux/Demux. If the loss of them is high, the network deployment cost will get higher certainly. In this graph, the vertical axis stands for the max insertion loss, and the horizontal axis shows several DWDM Mux vendors or suppliers like Cisco, Finisar, MRV, fiber-mart.COM, etc. From this comparison, we can see all the max insertion loss of 40CH DWDM Mux are not very high. The max insertion loss of MRV is 7.5dB, Cisco is 6.5dB and Finisar is 5dB. But compared with these vendors or suppliers, fiber-mart.COM 40CH DWDM Mux has the lowest max insertion loss—4.5dB. Besides, the typical insertion loss of fiber-mart.COM 40CH DWDM Mux is only 3dB. All these indicate that fiber-mart.COM 40CH DWDM Mux is perfect for long haul DWDM transmission.
How to Test Insertion Loss of 40CH DWDM Mux
Since insertion loss has profound influence on the whole optical networks, knowing how to test the insertion loss of 40CH DWDM Mux is important. And the testing can be finished with an optical power meter if no professional equipment is available. Here offers a video to illustrate the insertion loss testing of our 40CH DWDM Mux, which uses Cisco Catalyst 4948E switch and our Cisco C25 compatible 10G DWDM SFP+ and C60 DWDM SFP+ modules that support 80km as light sources. This testing just takes channel 25 port and channel 60 port as examples to explain the testing method.
High quality, low insertion loss 40CH DWDM Muxs can not only manage bandwidth and expand capacity of existing optical backbones, but also save cost in DWDM network design. fiber-mart.COM 40CH DWDM Mux is a high density, low insertion loss passive modules, providing an ideal solution for DWDM networks. Custom services are also available. If you are interested, welcome to visit our website www.fiber-mart.com or contact us via [email protected] for more detailed information.

Other news for Saturday 04 November, 2017

View all news for Saturday 04 November, 2017 on one page

News for Thursday 02 November, 2017

View all news for Thursday 02 November, 2017 on one page

Recent News

News Archive - See All News from Fiber-Mart.COM

Copyright © 2009-2021 Fiber-MART.COM. All Rights Reserved.
Fiber-MART.COM Secure Certificate
Product Tags: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | X | Y | Z | 0-9