.webp "Fiber Mux & OADM")
Multimode fiber patch cable is used to make a jumper from the equipment to the fiber optic cabling link. Thick protective layer, generally used in the connection between the optical transceiver and the terminal box. The general multimode fiber cable is orange, and some gray. Joints and protection apply beige or black; transmission distance is shorter. Fiber cables (also known as fiber optic connectors) used to make a jumper from the equipment to the fiber optic cabling link. Multimode fiber patch cable thicker protective layer, generally used in the connection between the optical transceiver and the terminal box. Multimode fiber patch cable’s two sizes: one is 62.5/125; another is 50/125. So we choose to use cable before we now determine that we need to use what kind of specifications. How we should use what specifications it? This is to determine, according to our use cable, fiber optic cable is also a cable of these two specifications: 62.5/125, 50/125. Select fiber accessories based on fiber optic cable to determine because of the fiber optic cable and fiber optic accessories is a one-to-one correspondence. We choose to be cautious. If you use the wrong cause data attenuation, packet loss.
Multimode fiber patch cable: core coarse (50 or 62.5μm), to be available for a variety of modes of light. However, its mode dispersion, which limits the frequency of the transmission of digital signals, and will be more severe with the increase of the distance. Therefore, multi-mode fiber transmission distance is relatively close, usually only a few kilometers.Come to fiber-mart.com and choose your right multimode fiber patch cable. You can have a look at our products under.
It’s a LC SC multimode fiber patch cable, 15m LC-SC Duplex 10G OM3 50/125 Multimode Fiber Patch Cable. Our LC-SC 10G OM3 50/125 multimode duplex fiber patch cords provide 10 gigabit data transfer speeds in high bandwidth applications, and they are five times faster than standard 50um fiber cables. These aqua OM3 10G 50/125 fiber patch cables are with LC connector and SC connector at the ends of them, and they work with both VCSEL laser and LED sources. Also, our 10G fiber optic patch cables are 100% optically tested for maximum performance. We have all lengths and connectors available.
Key Features:
(1)LC-SC ConnectorsMultimode duplex fiber optic cable
(2)Complete with Lucent Technologies aqua jacket
(3)Bandwidth transmitting rates up to 10 gigabits
(4)All of our fiber optic patch cables feature the high degree connectors
(5)100% optically tested to ensure high performance
We also have other cables like ST LC fiber patch cable and so on. Just come here fiber-mart.com and make your desicion.
FIBER-MART(Fiber-Mart.com), based in HongKong & U.S., belongs to SUNMA Group, a worldwide leading supplier in fiber optic network, fttx, fiber cabling & connectivity, fiber testing, fiber splicing, fiber polishing, fiber blowing & integrated network solutions.
No comments have been posted yet.