SM-290 Automatic Single-Core Optical Thermal Fiber Stripper
1. Equipped with a 2.8-inch true-color LCD touch screen, which can display the fiber stripping temperature, fiber stripping length, detection of fiber stripping times and user help and other parameter information in real time;
2. The user can arbitrarily set the stripping length according to the requirements within the range of 0-58 mm through the touch screen, reducing the idle travel of the motor and effectively improving the stripping efficiency of the user;
3. This machine can strip all standard single-core optical fibers within the cladding diameter range of 60um-800um by replacing the optical fiber clamp, and the replacement of the optical fiber clamp is simple and convenient;
4. The user can arbitrarily set the appropriate fiber stripping temperature within the temperature range of 60°C-120°C according to the different fiber coating materials through the touch screen to ensure the quality of fiber stripping;
5. The stripping blade adopts a unique guide bevel design according to the characteristics of single-core optical fiber to ensure that the optical fiber cut is flat and does not damage the fiber. It is durable, easy to replace the blade, and simple to adjust;
6. The machine adopts the longitudinal automatic stripping method, the optical fiber stripping force is uniform, the stripping quality is high, the performance is stable, and the stripping consistency is good;
7. This machine adopts imported high-precision guide rails and high-precision motors imported from Japan. The motor has low noise and stable operation, which effectively improves the user experience.
Fiber thermal stripping device design has the advantages of small size, light weight, easy to use and reliable, longitudinal stripping, stripping force is small, peel high fiber quality; blade, durable, and the replacement is convenient,
The linear bearing guide and thermal stripping, ensure no damage to the fiber, easy peeling coating, stripping speed etc..
Specification
|
Fiber cladding diameter
|
60um ~ 800um |
Fiber coating diameter
|
100μm-1000μm |
Coating strip length
|
Max 60mm
|
Heating mode
|
Cover Heating
|
Always heating
|
Temperature setting
|
60℃~120℃ Adjustable
|
Optical fiber fixing method
|
Customized Fixture(According to Fiber Diameter)
|
Power supply mode
|
Using the adapter to DC12V power conversion
|
Size
|
198.5(L) X 86(D) X 111.5(H) mm
|
Weight
|
1600g
|
Environmental requirements
|
The temperature of 0-40 DEG C below 85%
|