WIRELESS RADIO LINK VS OPTICAL FIBER CABLE
Data transfer in the mobile backhaul networks (from radio base stations to the core network) can be done in two ways – wireless using Point-to-Point radio communication or wired through optical fiber cables and copper wires.
Copper wires are quickly being phased-out as they are costly and do not support the necessary data rates. Optical fiber offers the heighest data throughput capacity but requires a physical link, which is costly as it requires permits (both by landlords and municipalities) and involves heavy construction work – hence take a long time to build out. Wireless connections on the other hand offers lower installations costs, more rapid deployment and still enables high data throughput.
Wireless Point-to-Point radios have been used for a long time to connect base stations (access points for mobile users) to the core mobile network. Today, approximately 50% of all cellular base stations are connected using wireless links. The downside has previously been limitations in capacity, but with the development of more cost-efficient millimeter wave radio solutions this has changed. Millimeter wave bands (primarily V-band and E-band) enable Gigabit data rates as they offer access to vastly more spectrum bandwidth compared to traditional microwave bands. Limited hop-lengths for millimeter wave communication (1 – 5km for E-band) is becoming less of a restriction as mobile base stations are installed closer and closer to each other.
With the build-out of 5G, millions of new base stations will be installed closer to the end user. Deploying these quickly and cost-efficiently will be a challenge. Where fiber is already available it will be the natural choice, but where it is not, wireless connections are expected to grow rapidly.
Other news for Tuesday 23 April, 2019
News for Monday 22 April, 2019